Page d'accueil / Produit / Rouleau de feuille de plastique PP / White Resistant Plastic PP Polypropylene Film Rolls for Vacuum Forming
Rouleaux de film plastique PP polypropylène résistant au blanc pour le formage sous vide
Pulixin est un excellent et principal fabricant et usine de feuille plastique en Chine. Nous avons la technologie et l'équipement avancés, le commerce étranger mûr et l'expérience d'exportation, et avons établi de bonnes relations de coopération avec des clients dans plus de 60 pays. Fourniture d'échantillons gratuits, OEM & ODM acceptés.
- Marque : PULIXIN
- Origine : Shanghai, Chine
- MOQ : 5 tonnes
- Épaisseur : 0,3~2mm
- Largeur : 300~850mm
- Application : Thermoformage
- Envoyer la demande
-
- Courriel : lindy@pulixin.com
- Téléphone : +8615221762039
- WhatApp
- Wechat
Description
Description of Resistant Plastic PP film, PP Polypropylene Film Rolls
Resistant Plastic PP film, PP Polypropylene Film Rolls made of PP resin through beer extrusion, calendaring, trimming and other processes. It has light weight, bright and calm surface, good heat resistance, high mechanical strength, excellent chemical stability and electrical insulation , Non-toxic and other characteristics, after thermoforming can be made into beverage cups, food boxes and other daily necessities.
Resistant Plastic PP film, PP Polypropylene Film Rolls molding specific gravity
Resistant Plastic PP film, PP Polypropylene Film Rolls specific gravity: 0.9-0.91 g / cm3 molding shrinkage: 1.0-2.5% molding temperature: 160-220 ° C. Low density, strength and stiffness, can be used at about 100 degrees. Has good electrical properties and high-frequency insulation is not affected by humidity, but becomes brittle at low temperatures, not resistant to mold and easy to age. Suitable for making general mechanical parts, corrosion-resistant parts and insulating parts.
Resistant Plastic PP film, PP Polypropylene Film Rolls molding performance
1. Crystal material, low hygroscopicity, prone to melt fracture, easy to decompose in contact with hot metal for a long time.
2. Good fluidity, but the shrinkage range and shrinkage value are large, and shrinkage holes, dents and deformation are easy to occur.
3. The cooling speed is fast, the pouring system and cooling system should slowly dissipate heat, and pay attention to control the molding temperature. Low temperature and obvious directionality. It is especially obvious at low temperature and high pressure. When the mold temperature is lower than 50 degrees, the plastic part is not smooth, and it is easy to produce poor welding, leaving marks, and warping deformation is easy to occur above 90 degrees.
Resistant Plastic PP film, PP Polypropylene Film Rolls made of PP resin through beer extrusion, calendaring, trimming and other processes. It has light weight, bright and calm surface, good heat resistance, high mechanical strength, excellent chemical stability and electrical insulation , Non-toxic and other characteristics, after thermoforming can be made into beverage cups, food boxes and other daily necessities.
Resistant Plastic PP film, PP Polypropylene Film Rolls molding specific gravity
Resistant Plastic PP film, PP Polypropylene Film Rolls specific gravity: 0.9-0.91 g / cm3 molding shrinkage: 1.0-2.5% molding temperature: 160-220 ° C. Low density, strength and stiffness, can be used at about 100 degrees. Has good electrical properties and high-frequency insulation is not affected by humidity, but becomes brittle at low temperatures, not resistant to mold and easy to age. Suitable for making general mechanical parts, corrosion-resistant parts and insulating parts.
Resistant Plastic PP film, PP Polypropylene Film Rolls molding performance
1. Crystal material, low hygroscopicity, prone to melt fracture, easy to decompose in contact with hot metal for a long time.
2. Good fluidity, but the shrinkage range and shrinkage value are large, and shrinkage holes, dents and deformation are easy to occur.
3. The cooling speed is fast, the pouring system and cooling system should slowly dissipate heat, and pay attention to control the molding temperature. Low temperature and obvious directionality. It is especially obvious at low temperature and high pressure. When the mold temperature is lower than 50 degrees, the plastic part is not smooth, and it is easy to produce poor welding, leaving marks, and warping deformation is easy to occur above 90 degrees.
Specificqtion of Resistant Plastic PP film, PP Polypropylene Film Rolls
Summary of Properties of Materials
1. Density Resistant Plastic PP film, PP Polypropylene Film Rolls is the lowest density of all synthetic resins, only 0.90~0.91g/cm3, which is about 60% of pvc density. This means that more products of the same volume can be produced with the same weight of raw materials.
2. Mechanical property pp has good tensile strength and rigidity, but poor impact strength, especially poor impact resistance at low temperature. In addition, if there is orientation or stress when the product is formed, the impact strength will also be significantly reduced. Although the impact strength is poor, its mechanical properties can compete with higher cost engineering plastics in many fields after modification such as filling or reinforcement.
Common acid and alkali organic solvents have little effect on it and can be used for tableware. A kind of A thermoplastic resin made by polymerization of propylene. There are three kinds of configurations, i.e. isotactic, random and indirect. Industrial products are mainly composed of isotactic. Resistant Plastic PP film, PP Polypropylene Film Rolls also includes copolymers of propylene and a small amount of ethylene. It is usually a translucent colorless solid, odorless and nontoxic. Because of its regular structure and high crystallization, its melting point is as high as 167 ℃, and it is heat-resistant. With a density of 0.90g/cm3, it is the lightest general-purpose plastic. Corrosion resistance, tensile strength 30MPa, strength, rigidity and transparency are better than polyethylene. The disadvantage is poor low temperature impact resistance and easy aging, but it can be overcome by modifying and adding antioxidant respectively
Summary of Properties of Materials
1. Density Resistant Plastic PP film, PP Polypropylene Film Rolls is the lowest density of all synthetic resins, only 0.90~0.91g/cm3, which is about 60% of pvc density. This means that more products of the same volume can be produced with the same weight of raw materials.
2. Mechanical property pp has good tensile strength and rigidity, but poor impact strength, especially poor impact resistance at low temperature. In addition, if there is orientation or stress when the product is formed, the impact strength will also be significantly reduced. Although the impact strength is poor, its mechanical properties can compete with higher cost engineering plastics in many fields after modification such as filling or reinforcement.
Common acid and alkali organic solvents have little effect on it and can be used for tableware. A kind of A thermoplastic resin made by polymerization of propylene. There are three kinds of configurations, i.e. isotactic, random and indirect. Industrial products are mainly composed of isotactic. Resistant Plastic PP film, PP Polypropylene Film Rolls also includes copolymers of propylene and a small amount of ethylene. It is usually a translucent colorless solid, odorless and nontoxic. Because of its regular structure and high crystallization, its melting point is as high as 167 ℃, and it is heat-resistant. With a density of 0.90g/cm3, it is the lightest general-purpose plastic. Corrosion resistance, tensile strength 30MPa, strength, rigidity and transparency are better than polyethylene. The disadvantage is poor low temperature impact resistance and easy aging, but it can be overcome by modifying and adding antioxidant respectively
Paramètres du produit
Parameters of Resistant Plastic PP film, PP Polypropylene Film Rolls
| PNom du produit | Rouleau de plastique PP thermoformé pour l'emballage de barquettes alimentaires |
| Application | emballage sous blister, emballage sous vide, emballage de couvercles de gobelets, etc. |
| Caractéristiques | 1. largement utilisé pour l'emballage médical, alimentaire, électronique, etc. 2. le PP est aujourd'hui un matériau respectueux de l'environnement. 3. les matériaux PP de première qualité ont une excellente transparence. après l'impression, le PP conserve la vraie beauté des couleurs. 4. le matériau PP peut être teinté en différentes couleurs selon la demande du client. |
| Épaisseur | 0,18-1,5 mm |
| Largeur | 100-800mm |
| Couleurs | Coloré |
| Diamètre intérieur de l'âme | 76 mm |
| Qualité | Conforme aux normes ISO9001 et GMP et testé avec succès par SGS |
| MOQ | 1000kgs |
| Avantages | 1. Haute résistance à la chaleur. 2. Faible absorption d'humidité . 3. La pureté. 4. Résistance et robustesse élevées. 5. Facile à soumettre à une série d'opérations de traitement secondaire. 6. Stabilité électrique avec des propriétés diélectriques stables. |
Pourquoi choisir Pulixin
PULIXIN est un excellent fabricant de rouleaux de feuilles de plastique PP en Chine. Notre usine couvre une superficie de plus de 10 000 mètres carrés et dispose de 4 lignes de production de feuilles de polypropylène rigides dotées d'équipements internationaux de pointe. Elle peut produire 3 000 à 5 000 tonnes de feuilles de plastique PP par mois, et la capacité de stockage maximale dépasse 10 000 tonnes.- Usine de haut niveau
- 1, 6000㎡ Surface
2, 10 lignes de coextrusion
3, 15 ans d'expérience
4, 2300+ clients réguliers
- Un service attentionné
- 1, Réponse rapide aux demandes de renseignements
2, Échantillon gratuit contre paiement des frais de port
3. Forte capacité, production courte et livraison rapide
4. L'inspection en usine est acceptée
5, Support OEM
- Contrôle strict de la qualité
- 1, Erreur d'épaisseur : +-0.1mm
2, Poids erroe:+-1kg
3, Impédance antistatique : +-0.1Ω
- Livraison dans les délais
- 1, Production : 1 jour après le prépaiement
2, Livraison : 5 jours après le paiement final
