Home / Product / PP Plastic Sheet Roll / ESD PP 10^10 Plastic Roll In Virgin Raw Materials
ESD PP 10^10 Plastic Roll In Virgin Raw Materials
Pulixin is an excellent and leading plastic sheet Manufacturer & factory in China. We have advanced technology and equipment, mature foreign trade and export experience, and have established good cooperative relations with customers in more than 60 countries. Free samples supply, OEM & ODM accepted
- Brand: PULIXIN
- Origin: Shanghai, China
- MOQ: 5 tons
- Thickness: 0.3~2mm
- Width: 300~850mm
- Application: Thermoforming
- Send Inquiry
-
- Email: lindy@pulixin.com
- Phone: +8615221762039
- WhatApp
- Wechat
Description
Features Of ESD PP Plastic Roll
PP extruded sheet roll is a popular thermoforming materials for food packaings, electronic packagings, cosmetics packagings medical packagings and hardware packaings.,etc. The width of PP Plastic sheet roll is 300~900mm. The thickness of PP Plastic sheet roll range from 0.3~2.0mm. Colorful PP sheets could be produced according to Pantone. card. When PP sheet roll used in food industry, the temperature could reach -40℃ to 120℃. For examples, Sushi tray, bento box, cup, cup lids and so on. ESD PP sheet roll widely used in electronic inductries for antistatic/conductive performance.
PP extruded sheet roll is a popular thermoforming materials for food packaings, electronic packagings, cosmetics packagings medical packagings and hardware packaings.,etc. The width of PP Plastic sheet roll is 300~900mm. The thickness of PP Plastic sheet roll range from 0.3~2.0mm. Colorful PP sheets could be produced according to Pantone. card. When PP sheet roll used in food industry, the temperature could reach -40℃ to 120℃. For examples, Sushi tray, bento box, cup, cup lids and so on. ESD PP sheet roll widely used in electronic inductries for antistatic/conductive performance.
Specification of ESD PP Plastic Roll
PP Sheet Blister Problem Treatment Sheet Forming
1. heating too fast.
The following methods can be taken to exclude: appropriately reduce the heater temperature.Slow down the heating speed appropriately.Properly increase the distance between the sheet and the heater, so that the heater from the sheet some further.
2. uneven heating.The following methods can be adopted to exclude:
(1) with baffle plate, air distribution hood or screen screen to adjust the distribution of hot air, so that the sheet parts evenly heated.
(2) check whether the heater and shelter net is damaged, and repair the damaged parts.
3. wet sheet.The following methods can be adopted to exclude:
(1) pre-drying treatment.For example, the thickness of 0.5 mm polycarbonate sheet should be dried for 1-2h at the temperature of 125-130 ~C, and the thickness of 3mm PP sheet should be dried for 6-7h.The thickness of 3mm * wood should be dried at 80-90 ‘E temperature for 1 — 2 hours, and should be immediately after drying hot forming.
(2) preheating treatment.Change the heating method to heating both sides.Especially when the thickness of the sheet is above 2nan, the two sides must be taken and heated.Do not open the PP sheet of moisture-proof packaging too early. PP sheet should be unsealed before hot forming and formed immediately.
PP Sheet Blister Problem Treatment Sheet Forming
1. heating too fast.
The following methods can be taken to exclude: appropriately reduce the heater temperature.Slow down the heating speed appropriately.Properly increase the distance between the sheet and the heater, so that the heater from the sheet some further.
2. uneven heating.The following methods can be adopted to exclude:
(1) with baffle plate, air distribution hood or screen screen to adjust the distribution of hot air, so that the sheet parts evenly heated.
(2) check whether the heater and shelter net is damaged, and repair the damaged parts.
3. wet sheet.The following methods can be adopted to exclude:
(1) pre-drying treatment.For example, the thickness of 0.5 mm polycarbonate sheet should be dried for 1-2h at the temperature of 125-130 ~C, and the thickness of 3mm PP sheet should be dried for 6-7h.The thickness of 3mm * wood should be dried at 80-90 ‘E temperature for 1 — 2 hours, and should be immediately after drying hot forming.
(2) preheating treatment.Change the heating method to heating both sides.Especially when the thickness of the sheet is above 2nan, the two sides must be taken and heated.Do not open the PP sheet of moisture-proof packaging too early. PP sheet should be unsealed before hot forming and formed immediately.
Product parameters
Parameters of ESD PP Plastic Roll
| Specification | PP Plastic Sheet roll | ||
| Color | Any color | Application | Electric packaging Food packaging Cosmetic&Gifts. |
| Width | 300~900mm | Certification | SGS,ROHS |
| Thickness | 0.3~1.5mm | Warranty | 2 years |
| Category | Printing Compound Food grade High cleanliness conductive Permanent Antistatic polymer common antistatic.,etc. |
Finished goods color | Matte/Glossy Transparent Common colors. |
| Resistance | 10^3~10^11Ω | MOQ | 3 mt |
| Laminating | PP, PS, PET, etc. | Price | Based on detailed specification |
| Packaging | Export Plastic Pallet | Port | Ningbo/Shanghai |
Why Choose Pulixin
PULIXIN is an excellent leading PP plastic sheet roll manufacturer in China. Our factory covers an area of more than 10,000 square meters and has 4 rigid polypropylene sheet production lines with international advanced equipment. It can produce 3,000-5,000 tons of PP plastic sheets per month, and the maximum storage capacity exceeds 10,000 tons.- High Level Factory
- 1, 6000㎡ Area
2, 10 co-extrusion lines
3, 15 years experience
4, 2300+ regular customers
- Considerate Service
- 1, Quick reply to inquiries
2, Free sample on paying the postage
3, Strong capacity, short production and fast delivery
4, Factory inspection acceptable
5, OEM Support
- Strict Quality Control
- 1, Thickness error:+-0.1mm
2, Weight erroe:+-1kg
3, Antistatic impedance: +-0.1Ω
- On Time Delivery
- 1, Production: 1days after prepayment
2, Delivery: 5days after final payment
